How to fix Whirlpool Stove F2 Error? Read to know more!

0
61

At some point in their homeownership experience, all homeowners will deal with a malfunctioning stove. When it comes to Whirlpool stoves specifically, one of the more frequent errors is F2. Although frustrating and prohibiting you from cooking your favorite meals, don’t fret; we are here to help you through it all. In this article we will detail what causes Whirlpool stove F2 error codes as well as steps on how you can correct them.

Causes of Whirlpool Stove F2 Error

Error F2 on a Whirlpool stove indicates an issue with its oven temperature sensor, responsible for monitoring oven temperatures and sending signals back to its control board to regulate them. When detected temperatures surpass those set on its control board, an F2 error appears on your display panel.

There can be various reasons for temperature sensor malfunction, including:

  • Sensor Wire Short Circuiting – One of the primary sources of Whirlpool stove F2 errors is due to sensor wire short-circuiting; this could occur if any wires become damaged, corroded, or disconnected.
  • Faulty Temperature Sensor – Temperature sensors may become damaged over time and stop sending their proper signals to the control board – leading to F2 errors as a result.
  • F2 Error Due to Control Board Malfunction Sometimes the control board itself can also cause F2 error codes; when this is the case, its failure prevents it from receiving signals from sensors properly, leading to error codes being displayed as F2.

Steps for Troubleshooting the Whirlpool Stove F2 Error

Now that we understand what causes Whirlpool stove F2 errors, let’s go through some troubleshooting steps to remedy them.

Step 1: Assess Sensor Wires

To get your sensors operating as intended, the first thing you should do is inspect their wires carefully for signs of damage, corrosion or disconnection – should any issues exist, the necessary replacement will need to occur immediately.

Step 2: Test Temperature Sensor

Once your wires have been assessed as in good working order, the next step in testing a temperature sensor using a multimeter is testing its resistance at room temperature – set it so the reading shows 1000-1100 Ohms on reading resistance test; place probes onto sensor terminals if testing resistance and place your multimeter readings there as indicated on step one; otherwise the sensor requires replacement.

Step 3: Examine Control Board

If your temperature sensor checks out fine, your control board could be to blame. Inspect for visible damage such as burned-out components; otherwise use a multimeter to test it using its current settings to see if there’s anything off with its operation – in that event it should be replaced immediately.

Conclusion

Overall, a Whirlpool stove F2 error typically results from a malfunctioning temperature sensor or control board. By following these troubleshooting steps and following their instructions for fixing this issue on your own stove, it should return to working condition again quickly and smoothly.

If you don’t feel confident performing these troubleshooting steps on your own, contacting a professional appliance repair service might be best. They have access to tools and expertise necessary for diagnosing and fixing the issue at hand.

LEAVE A REPLY

Please enter your comment!
Please enter your name here